Making Handbalancing Canes

Here’s a quick DIY for making handbalancing canes. My daughter and I built these in an afternoon. They’re great for working on handstands, press-ups, L-sits, dips, and handbalancing tricks. We use them during aerial straps classes at Cirque School LA, so I thought it would be fun to make a set at home.

IMG_2649IMG_2665

Parts:
-One 2’x’2′ piece of 3/4″ plywood (we started with pine, but that was too soft) cut down to three sections
-Two 4″ lengths of 2×4 for hand blocks (I used some scrap framing pulled from our 1939 house during a renovation)
-Four 3/4″ floor flanges
-Two 18″ sections of threaded 3/4″ black pipe (you can choose 12″ for a shorter stand, and can always swap them out later)
-Twelve #10 1-1/2″ screws
-Sixteen #10 3/4″ screws

jepCanesThumb2.jpg

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s